Gorilla 100% Silicone Sealant #8060001, 10 oz - Pack of 6
- 100% SILICONE SEALANT*
- 30 MINUTE WATER READY
- INDOOR/OUTDOOR – All Weather
- 100% WATERPROOF
- WONT YELLOW, SHRINK OR CRACK
- MOLD & MILDEW RESISTANT
- AVAILABLE IN CLEAR AND WHITE
- GREAT FOR: Kitchen, Bath, Window, Door, Plumbing, Gutters, Auto, Marine and more!**
**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.
TO OPEN: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.
TO USE: All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
- Insert into cartridge gun.
- Apply sealant, pushing bead ahead of nozzle.
- Smooth bead immediately after application, before a skin forms.
30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.
CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solver manufacturer’s instructions.
STORAGE: Store in cool, dry location with nozzle attached. To re-use product, remove nozzle and clean out cured sealant from the tip.
LIFETIME GUARANTEE: The Gorilla Glue Company warrants this product meets indicated performance properties for as long as you own your home if product is properly used and stored. If not satisfied, return proof of purchase or remaining product for replacement product or refund. Refund will not exceed the full price of the product. The Gorilla Glue Company is not liable for damages in excess of purchase price. No other warranties, either expressed or implied are given or made. You may have rights that vary state to state, so above limitation and exclusions may not apply.
APPLICATION TEMPERATURE – Best above 40° F
SERVICE TEMPERATURE – -40° to 350° F
OUTDOOR – Yes
MOISTURE RESISTANT – Waterproof
PAINTABLE – No
SANDABLE – No
STAINABLE – No
CURED COLOR – White
TECHNICAL STANDARDS – Meets ASTM C-920 specification for class 25 uses G,A
STORAGE TIPS – Store in a cool, dry location away from heat. Store with nozzle attached. T
GAP FILLING – Yes. Use backer rod for gaps larger than 1/2″